China
English
JapanesePrecautions for acrylic products
Author：小编
ｕｐｄａｔｅ time：2023-02-25
Hits：
Acrylic products refer to handicrafts or consumer goods made of acrylic materials according to their good characteristics. Because acrylic products have the advantages of high transparency, low price and easy machining, acrylic products are widely used and can be seen everywhere in our lives.
After the processing and completion of acrylic products, there are four points that need our attention:
First, the thermal deformation stability of ordinary acrylic plate is about 100 degrees, so pay attention to this temperature value when using acrylic products, for example, the temperature should not be higher than 90 degrees during continuous use.
Second, the surface hardness of acrylic products is equivalent to aluminum, so care should be taken to avoid scratching the surface when using or processing acrylic products. If scratched, the original glossy surface can be restored by polishing.
Third, if the acrylic products are blurred or unclean due to slight scratches or dust adsorption caused by static electricity, they can be wiped clean with 1% soapy water with a soft cloth.
Fourth, this is the detail that needs to be noticed during the assembly of acrylic products. Because the acrylic plate has a certain expansion coefficient, the thermal expansion and contraction factors of the acrylic plate must be taken into account during the installation, and the expansion gap must be reserved during the assembly.
After the processing and completion of acrylic products, there are four points that need our attention:
First, the thermal deformation stability of ordinary acrylic plate is about 100 degrees, so pay attention to this temperature value when using acrylic products, for example, the temperature should not be higher than 90 degrees during continuous use.
Second, the surface hardness of acrylic products is equivalent to aluminum, so care should be taken to avoid scratching the surface when using or processing acrylic products. If scratched, the original glossy surface can be restored by polishing.
Third, if the acrylic products are blurred or unclean due to slight scratches or dust adsorption caused by static electricity, they can be wiped clean with 1% soapy water with a soft cloth.
Fourth, this is the detail that needs to be noticed during the assembly of acrylic products. Because the acrylic plate has a certain expansion coefficient, the thermal expansion and contraction factors of the acrylic plate must be taken into account during the installation, and the expansion gap must be reserved during the assembly.
